ABB ACS580-04, Руководство по оборудованию

Страница: 187 / 298

Losses, cooling data and noise
Noise
Typical power
loss
1)
Air flow
Frame
size
ACS580-04…
W cfm m
3
/h dB(A)
72 6492 707 1200 R10 505A-4
72 6840 707 1200 R10 585A-4
72 8046 707 1200 R10 650A-4
72 8108 707 1200 R11 725A-4
72 9652 707 1200 R11 820A-4
71 10887 848 1420 R11 880A-4
1) Typical drive losses when it operates at 90% of the motor nominal frequency and 100% of the motor nominal
current.
Terminal and entry data for the power cables
The maximum accepted cable size is 4 × (3 × 240) mm
2
or 4 × (3 × 500 MCM). Screw
size for connecting busbars to the drive module input and output busbars: M12,
tightening torque 50…75 N·m (37…55 lbf·ft).
￭
Drive modules without output cable connection terminals (+0H371)
and with a common mode filter (+E208)
It is possible to use the maximum cable size 4 × (3 × 240) mm
2
or 4 × (3 × 500 MCM)
only with special cable lugs and additional insulation. For more information, contact
your local ABB representative.
￭
Drive modules with optional cabling panels (+H381)
The maximum accepted cable size is 4 × (3 × 240) mm
2
or 4 × (3 × 500 MCM). The
cabling panels are connected to the drive module busbars with M12 serpress nuts,
tightening torque 30 N·m (20 lbf·ft).
Technical data 187