ABB ACS550 Series, Руководство пользователя

Страница: 117 / 310

ACS550 User’s Manual 117
Parameters
35 =
COMM
– Energize relay based on input from fieldbus communication.
• Fieldbus writes binary code in parameter 0134 that can energize relay 1…relay 6 according to the following:
• 0 = De-energize relay, 1 = Energize relay.
36 =
COMM
(-1) – Energize relay based on input from fieldbus communication.
• Fieldbus writes binary code in parameter 0134 that can energize relay 1…relay 6 according to the following:
• 0 = De-energize relay, 1 = Energize relay.
37 =
TIMED FUNC
1 – Energize relay when Timed Function 1 is active. See Group 36: TIMED FUNCTIONS .
38…40 =
TIMED FUNC
2…4 – Energize relay when Timed Function 2…4 is active. See
TIMED FUNC
1 above.
41 =
MNT TRIG FAN
– Energize relay when cooling fan counter is triggered. See Group 29: MAINTENANCE TRIG .
42 =
MNT TRIG REV
– Energize relay when revolutions counter is triggered. See Group 29: MAINTENANCE TRIG .
43 =
MNT TRIG RUN
– Energize relay when run time counter is triggered. See Group 29: MAINTENANCE TRIG .
44 =
MNT TRIG MWH
– Energize relay when MWh counter is triggered. See Group 29: MAINTENANCE TRIG .
46 =
START DELAY
– Energize relay when a start delay is active.
47 =
USER LOAD C
– Energize relay when a user load curve fault or alarm occurs.
52 =
JOG ACTIVE
– Energize relay when the jogging function is active.
1402 RELAY OUTPUT 2
Defines the event or condition that activates relay 2 – what relay output 2 means.
• See 1401
RELAY OUTPUT
1.
1403 RELAY OUTPUT 3
Defines the event or condition that activates relay 3 – what relay output 3 means.
• See 1401
RELAY OUTPUT
1.
1404 RO 1 ON DELAY
Defines the switch-on delay for relay 1.
• On / off delays are ignored when relay output 1401 is set to PFC.
1405 RO 1 OFF DELAY
Defines the switch-off delay for relay 1.
• On / off delays are ignored when relay output 1401 is set to PFC.
1406 RO 2 ON DELAY
Defines the switch-on delay for relay 2.
• See
RO
1
ON DELAY
.
1407 RO 2 OFF DELAY
Defines the switch-off delay for relay 2.
• See
RO
1
OFF DELAY
.
1408 RO 3 ON DELAY
Defines the switch-on delay for relay 3.
• See
RO
1
ON DELAY
.
Code Description
Par. 0134 Binary RO6 RO5 RO4 RO3 RO2 RO1
0 000000 0 0 0 0 0 0
1 000001 0 0 0 0 0 1
2 000010 0 0 0 0 1 0
3 000011 0 0 0 0 1 1
4 000100 0 0 0 1 0 0
5…62 … … … … … … …
63 111111 1 1 1 1 1 1
Par. 0134 Binary RO6 RO5 RO4 RO3 RO2 RO1
0 000000 1 1 1 1 1 1
1 000001 1 1 1 1 1 0
2 000010 1 1 1 1 0 1
3 000011 1 1 1 1 0 0
4 000100 1 1 1 0 1 1
5…62 … … … … … … …
63 111111 0 0 0 0 0 0
1404
ON DELAY
1405
OFF DELAY
Control event
Relay status