ABB ACS480, Руководство по оборудованию, Страница: 121 / 180

parts and other components of the controller should be examined and replaced if
damaged. If burnout of the current element of an overload relay occurs, the complete
overload relay must be replaced.
• The integral solid state short circuit protection of the drive does not provide branch
circuit protection.
• The drive provides motor overload protection. For adjustments, see the firmware manual.
• The drive overvoltage category is III.
Disclaimers
￭ Generic disclaimer
The manufacturer shall have no obligation with respect to any product which (i) has been
improperly repaired or altered; (ii) has been subjected to misuse, negligence or accident;
(iii) has been used in a manner contrary to the manufacturer’s instructions; or (iv) has failed
as a result of ordinary wear and tear.
￭ Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the network,
its system and the interface against any kind of security breaches, unauthorized access,
interference, intrusion, leakage and/or theft of data or information. ABB and its affiliates are
not liable for damages and/or losses related to such security breaches, any unauthorized
access, interference, intrusion, leakage and/or theft of data or information.
Technical data 121