ABB ACS180-04S-03A7-1, Руководство по оборудованию, Страница: 133 / 192

Maximum motor cable length, 4 kHz Frame
Class 3 Class 2
Class 1
1)
ft m ft m ft m
131 40 131 40 131 40 R3
98 30 98 30 98 30 R4
1) Category C1 with conducted emissions only. Radiated emissions are not compatible when measured
with the standard emission measurement setup and must be measured on cabinet and machine
installations for each case.
Note:
• Radiated emissions are according to C2 with single phase ACS180-04S...-1
drives. For ACS180-04S...-4 drives, use a metal enclosure to fulfill radiated
emissions C2/C1 limits with an external EMC filter.
• External EMC filter must be used together with ACS180-04S-... drives.
• For ACS180-04N... drives, the maximum motor cable lengths are according to
the motor cable length table. The EMC category for these drives is C4.
• For ACS180-04S-...-2 drives, the EMC category is C4. In order to achieve higher
EMC category, must use external EMC filters.
Control connection data
0 … 10 V DC (10% overrange, 11 V DC max.) Voltage signal, single-
ended Analog inputs (AI1,
AI2)
Rin = 38 kohm
0 … 20 mA (10% overrange, 22 mA max.) Current signal, single-
ended
Rin = 205 ohm
≤ 1.0%, of full scale Inaccuracy
10 V DC ±1%, max. load current 10 mA Potentiometer refer-
ence value
0 … 20 mA (10% overrange, 22 mA max.) into
maximum 500 ohm load Current output mode Analog output (AO)
0 … 10 V DC (10% overrange, 11 V DC max.)
into 200 kohm minimum load (resistive) Voltage output mode
≤ 1.5%, of full scale Inaccuracy
+24 V DC ±10%, max. 100 mA As output Auxiliary voltage out-
put (+24V)
Technical data 133