PREVENTIVE AND CORRECTIVE MAINTENANCE
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
156/166
11.6.7. Cleaning the drive
Overview
When cleaning the drive, mind the following:
–
To prevent dirt falling into equipment, cover the equipment.
The drive contains components which are sensitive to electrostatic discharge.
Therefore, take electrostatic-sensitive precautions and use suitable tools.
–
Clean circuit boards with special care. To prevent the components being
damaged, use antistatic brushes and a vacuum cleaner with a soft nozzle.
–
Remove dust on assemblies and busbars inside the cabinet with a vacuum
cleaner and lint-free cleaning cloths.
–
Remove water, oily or greasy deposits on assemblies, components and busbars
with water- and oil-absorbing microfibers such as 3M Scotch Brite.
–
Use a nylon brush or a vacuum cleaner for removing dust or deposits from
recesses.
–
Clean the outside of the cabinet with a vacuum cleaner and cleaning cloths.
NOTICE
Risk of component damage.
Dust on electrical components and wiring can cause failure and damage
the components. Dust and moisture can build up in loose connections and
cause loss of low-level signals.
–
Check the cabinet regularly for signs of dust and humidity and clean
if necessary.
NOTE – Alcohol and solvents can damage the components.
–
Use appropriate and recommended cleansing agents.
