manualshive.com logo in svg

ABB ACS-AP Series, Руководство пользователя

Поделиться
Скачать
ABB ACS-AP Series Скачать руководство пользователя страница 19

Control panel overview   19

Status LED

The control panel has a status LED that indicates if there are any faults or warnings 
present. The table below shows the meaning of the LED indications.

For further information on fault and warning indications, see 

Identifying error and 

warning messages

 on page 

45

.

USB connector

The USB connector is used for connecting the control panel to a PC. When 
connected, the control panel acts as an USB adapter for data transfer between the 
PC tool and the drive. It is also possible to transfer data between the PC and the 
control panel through the USB connection.

RJ-45 connector

The RJ-45 connector is used to electrically connect the control panel to the drive. 
Mechanical connection is achieved with the clip on the top.

Type code label

The type code label contains revision information. The revision letter and the software 
version of the control panel are highlighted in the image below.

Battery cover

Underneath the cover there is a compartment for the battery that powers the real-time 
clock of the control panel.

Green, continuous

The drive is functioning normally.

Green, flickering

Data is transferred between the PC tool and drive through the 
USB connection of the control panel.

Green, blinking

There is an active warning in the drive.

Red, continuous

There is an active fault in the drive.

Assistant Panel Guide Rev B.book  Page 19  Tuesday, April 10, 2012  12:08 PM

Содержание ACS-AP Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды