ABB ACQ80, Руководство по прошивке

Страница: 243 / 390

Parameters 243
83.03 Total cleaning
count
Displays the cleaning count. Cleaning count
increments by one, when the sequence of
cleaning cycles are completed.
For example, if
83.16 Cycles in cleaning program
is
set as 3, the pump cleaning completes after three
cycles of reverse and forward motions of the
pump and the cleaning count changes to 1.
0
0...
42994967000 Total cleaning count. 1 = 1
83.10 Pump cleaning
action
Enables the pump cleaning action.
Cleaning
Off Pump cleaning is disabled. 0
Cleaning Pump cleaning is started based on triggers. 1
Warning only Generates
D507 Pump cleaning needed
warning
message based on triggers.
2
83.11 Pump cleaning
triggers
Enables/disables the pump cleaning sequence
for the drive, and defines the triggering
conditions.
Note: If DI1 remains On after cleaning is finished,
no cleaning sequence is started. The drive starts
cleaning on next start, if the trigger signal is On
when motor is started.
0b0000
0000h…FFFFh Pump cleaning triggers, 1 = 1
No. Name/Value Description Def/
FbEq16
Bit Name Description
0 Reserved
1 Every start Cleaning starts at every start.
2 Every stop Cleaning starts at every stop.
3...5 Reserved
6 Fixed time interval Time interval defined by parameter
83.15 Fixed
time interval
.
7 Combined timer1 Combined timer 1 of timed functions starts
cleaning.
8…9 Reserved
10 Supervision 1 Cleaning sequence starts when Supervision 1 is
high.
11 Supervision 2 Cleaning sequence starts when Supervision 2 is
high.
12 Supervision 3 Cleaning sequence starts when Supervision 3 is
high.
13 DI4 Cleaning sequence starts when DI4 is high.
14 DI5 Cleaning sequence starts when DI5 is high.
15 DI6 Cleaning sequence starts when DI6 is high.