ABB ACH550-BCR, Руководство пользователя

Страница: 377 / 642

ACH550 E-Clipse Bypass User’s Manual 2-31
Control panel
Off/Reset Key
The
Off/Reset Key
may be used to manually stop the motor if the motor has been
running on bypass power. The Off/Reset key also resets most bypass faults. It may
take several minutes before the bypass can be reset after an overload trip. If a
bypass fault condition is present the second press of this key places the bypass in
the OFF mode.
Auto Key
The
Auto Key
selects the Auto Start contact or serial communications as the means
for starting and stopping the motor in the bypass mode.
Hand Key
The
Hand Key
can be used to manually start the motor when the bypass has been
selected as the power source for the motor.
Bypass control panel modes
The HVAC Bypass Control Panel has several different modes for configuring,
operating and diagnosing the bypass. The modes are:
• Default Display mode – Provides (HAND/OFF/AUTO) indication of the bypass
operating control mode.
• Bypass Status mode – Provides status indications of the current system operating
conditions.
• Start-Up Parameter Mode – Provides a list of parameters or operating conditions
that may be configured or viewed during startup.
• Parameter List mode – Used to edit parameter values individually.
• Changed Parameter mode – Displays changed parameters.
• Bypass Fault Display mode – If there is an active bypass fault, the control panel
will flash the fault number and fault diagnostic indication in English.
• Bypass Alarm Display mode – If there is an active bypass alarm, the control panel
will flash the alarm number and alarm diagnostic indication in English.
The different modes are accessed through the HVAC Bypass Control Panel’s menu
structure illustrated on the following page.