ABB ACH550-01, Руководство пользователя

Страница: 423 / 454

Technical data 411
ACH550 User's Manual
Applicable standards
The drive complies with the following standards:
CE marking
A CE mark is attached to the drive to verify that the drive follows
the provisions of the European Low Voltage and EMC Directives
(Directive 73/23/EEC, as amended by 93/68/EEC, and Directive
89/336/EEC, as amended by 93/68/EEC).
Compliance with the EMC Directive
The EMC Directive defines the requirements for immunity and
emissions of electrical equipment used within the European
Applicable standards
EN 50178 (1997) Electronic requirement for use in power
installations.
IEC/EN 61800-5-1
(2003)
Electrical, thermal and functional safety
requirements for adjustable frequency
a.c. power drives
IEC/EN 60204-1
(1997) +
Amendment A1
(1999)
Safety of machinery. Electrical
equipment of machines. Part 1: General
requirements. Provisions for compliance:
The final assembler of the machine is
responsible for installing:
• an emergency-stop device
• a supply disconnecting device.
IEC/EN 60529
(1991)
Degrees of protection provided by
enclosures (IP code)
IEC 60664-1
(1992)
Insulation coordination for equipment
within low-voltage systems. Part 1:
Principles, requirements and tests
IEC/EN 61800-3
(2004)
Adjustable speed electrical power drive
systems. Part 3: EMC requirements and
specific test methods
IEC/EN 61000-3-12 EMC standard limiting harmonic currents
produced by equipment connected to
public low-voltage systems
UL 508C UL Standard for Safety, Power
Conversion Equipment, third edition