ABB ACH480, Руководство по оборудованию

Страница: 149 / 214

UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards
by the Underwriters Laboratories. Valid with rated voltages up to 600 V.
RCM mark
Product complies with Australian and New Zealand requirements specific to EMC,
telecommunications and electrical safety. For fulfilling the EMC requirements, see the
additional information concerning the drive EMC compliance (IEC/EN 61800-3).
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC
mark is required in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) green mark
The product complies with
the People’s Republic of China Electronic Industry Standard
(SJ/T 11364-2014). The product does not contain toxic and hazardous substances or
elements above the maximum concentration values, and it is an environmentally-friendly
product which can be recycled.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate col-
lection point and not placed in the normal waste stream.
KC mark
Product complies with Korea’s product safety requirements for electrical and electronic
equipment and components that utilize power from 50…1000 V AC.
BTL (BACnet Testing Laboratories) mark
Product has BACnet conformance certificate.
EMC compliance (IEC/EN 61800-3:2004 + A1:2012)
￭ Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its
locality.
First environment includes establishments connected to a low-voltage network which
supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Technical data 149