manualshive.com logo in svg

ABB AC500 V3, Системное руководство, Страница: 38 / 119

Поделиться
Скачать
ABB AC500 V3 Скачать руководство пользователя страница 38

5.6  Mounting and demounting the terminal unit

1.

Mount DIN rail 7.5 mm or 15 mm.

2.

Mount the terminal unit.

The terminal unit is snapped into the DIN rail in the same way as the Terminal Base.

Once secured to the DIN rail, slide the terminal unit to the left until it fully locks into place

creating a solid mechanical and connection.

When attaching the devices, make sure the bus connectors are securely

locked together to ensure proper connection. Max. 10 terminal units can

be attached.

3.

Demounting: A screwdriver is inserted in the indicated place to separate the terminal units.

If the terminal unit should be mounted with screws, wall mounting accessories TA526 must be

inserted at the rear side first. These plastic parts prevent bending of the Terminal Base while

screwing on.

Mounting on

DIN rail

Mounting with

screws

 

Mechanical planning and installation

Mounting and demounting the terminal unit 

2023/03/03

3ADR011074, 1, en_US

38

Содержание AC500 V3
























































































































Отзывы:

Нет отзывов