manualshive.com logo in svg

ABB AC500-S, Руководство по безопасности пользователя

Поделиться
Скачать
ABB AC500-S Скачать руководство пользователя страница 417

6.

Go to F-Parameter tab and press 

“Calculate”

 button once more, even if the previous value is still avail-

able. Compare that the value shown in “Checksum iParameter” field and the one in F_iPar_CRC field

of the F-Parameter editor are the same.

ð

If F_iPar_CRC values are the same, then the verification procedure for given iParameter settings of

the given AC500-S Safety I/O module 

was successfully passed.

Important!

n

If any errors (F_iPar_CRC or iParameters are not equal) were identified during Steps 1 … 6, then one

has to re-do the same procedure from the beginning. If after this second repetition there is still inconsis-

tency, contact ABB technical support for help.

n

Note, if iParameters values were verified as described in Steps 1 … 6, you can reuse this iParameter

combination with the given F_iPar_CRC for further modules of the same type without repeating the verifi-

cation procedure described above.

6.5.2  Verification tables for iParameter settings in AC500-S Safety I/Os

The instructions below provide a basis for cross-check of values set for iParameters in “AI581-S”, “DI581-S”

and “DX581-S” tabs.

Checklists for AC500-S Commissioning

Verification procedure for safe iParameter setting in AC500-S Safety I/Os >  Verification tables for iParameter settings in AC500-S

Safety I/Os

30.03.2017

AC500-S

417

Содержание AC500-S





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды