manualshive.com logo in svg

ABB AC 800M, Конфигурация, Страница: 211 / 260

Поделиться
Скачать
ABB AC 800M Скачать руководство пользователя страница 211

Section 6  Linking Device LD 800DN

Configuration Recovery

9ARD000014-600 A

211

 

Configuration Recovery

Configuration Recovery can be enabled only if the 

ADR

 parameter is enabled. 

Configuration Recovery is enabled by enabling the 

Config Recovery

 parameter of 

the DeviceNet slave device. In Configuration Recovery, the DeviceNet device 
configuration stored in LD 800DN is written into the slave device that replaces the 
lost slave device.

Memory Space Limitations for Configuration Recovery

Every 

Config Recovery

 enabled slave device, which has user configurable 

parameters, occupy some memory space in the linking device. The size of memory 
available for this, in LD 800DN, is limited to 130560 bytes.

If the total size of the user configurable parameters of all 

Config Recovery

 enabled 

devices exceed 130560 bytes, then Configuration Recovery will not work for the 
DeviceNet devices. This is stated in a warning, shown during download, along with 
the hardware tree positions of the devices. When this warning appears, perform 
either of these:

•

Cancel the process and go online to disable the configuration recovery for some 
slaves in Control Builder, so that other required devices can get this feature 
enabled.

•

Ignore the warning. In this case, the Configuration Recovery will not be 
enabled for some devices and they will have the warning in UnitStatus —

Keeper space exceeded. ADR not configured

.

Configuring ADR from Control Builder

Consider the following factors when you configure the ADR feature from Control 
Builder: 

•

For ADR feature to work, enable the parameter 

ADR

 in the hardware editor of 

LD 800DN. By disabling this parameter, it disables 

Address Recovery

 and 

Configuration Recovery

 for all DeviceNet devices. 

When Configuration Recovery is disabled, newly inserted DeviceNet device will 
not be configured with the existing configuration parameters.

Содержание AC 800M





































































































































































































































































Отзывы:

Нет отзывов