ABB Ability MACHsense-R, Руководство пользователя

Страница: 37 / 74

￭
Example 1: Location of accelerometers on drive end side of motor
On the drive end (DE) of the motor, pointing in the direction of
the shaft. DE Axial 1
On top of the bearing housing, pointing directly towards the
bearing. This sensor should be mounted at an angle of 90 degrees
to the DE Horizontal sensor. DE Vertical 2
On the DE of the motor, pointing directly towards the bearing. DE Horizontal 3
On the Non-Drive End (NDE) of the motor, pointing directly to-
wards the bearing. NDE Horizontal 4
Installing the accelerometers 37