ABB Ability 800xA Series, Операция

Страница: 123 / 332

Section 6 Status Displays System Status Display
3BUR002418-600 A 123
Subsystem Types
The available subsystem types (shown above icon on icon views and in the heading
line of the corresponding Subsystem or I/O Status Display) include:
ADVANT STATION Advant Station
COMPACT STATION Advant Controller 410 (AC410) Subsystem
PROCESS STATION Advant Controller 460 (AC460) Subsystem
CONSOLE Console Subsystem
CONTROLLER Controller Subsystem
DATA PROCESSOR Turbo Subsystem
DCN2DCN DCN/DCN Interface
GATEWAY Ethernet Interface
UNKNOWN Subsystem not identifiable
Address
The device number address for an Advant Station, AC410, AC460, Console, Data
Processor Subsystem, DCN/DCN Interface, or Gateway Interface is determined by
configuration. Subdevice numbers, for the Controller Subsystem only, are
determined by the module position in the controller card file and are shown in the
Subsystem Status Display.
Subsystem Name
The subsystem name shown for each icon of the System Status Display is the 21
character name entered in the TEMPLET NAME field when that subsystem was
configured.
Subsystem Status
The status of each subsystem DCN connection is indicated by its color coded status
boxes. The number of status boxes depends on the type of subsystem. CONSOLE,
DATA PROCESSOR, and GATEWAY icons contain two status boxes that indicate
the status of D/M Module 1 and 2. CONTROLLER icons contain two status boxes
that indicate the status of D/F Module 1 and 2 and up to 12 status boxes that indicate