![background image](http://html.mh-extra.com/html/abb/615-series-ansi/615-series-ansi_technical-manual_4665098.webp)
1MAC050144-MB C
Section 3
Basic functions
615 series ANSI
91
Technical Manual
The IN input can be connected to any logic application signal (logic function output,
binary input, application function output or received GOOSE signal). Due to application
logic quality bit propagation, each (simple and even combined) signal has quality which
can be evaluated.
The OUT output indicates quality bad of the input signal. Input signals that have any other
than test bit set, will indicate quality bad status.
3.12.2.2
Signals
Table 72:
QTY_BAD Input signals
Table 73:
QTY_BAD Output signals
3.12.3
T_HEALTH function block
3.12.3.1
Functionality
The T_HEALTH function evaluates enumerated data of “Health” data attribute. This
function block can only be used with GOOSE.
The IN input can be connected to GOOSERCV_ENUM function block, which is receiving
the LD0.LLN0.Health.stVal data attribute sent by another IED.
The outputs OK, WARNING and ALARM are extracted from the enumerated input value.
Only one of the outputs can be active at a time. In case the GOOSERCV_ENUM function
block doesn't receive the value from the sending IED, the default value (0) is used and the
ALARM is activated in the T_HEALTH function block.
3.12.3.2
Signals
Table 74:
T_HEALTH Input signals
Table 75:
T_HEALTH Output signals
Name
Type
Default
Description
IN
Any
0
Input signal
Name
Type
Description
OUT
BOOLEAN
Output signal
Name
Type
Default
Description
IN
Any
0
Input signal
Name
Type
Description
OK
BOOLEAN
Output signal
WARNING
BOOLEAN
Output signal
ALARM
BOOLEAN
Output signal
Содержание 615 Series ANSI
