![background image](http://html.mh-extra.com/html/abb/615-series-ansi/615-series-ansi_technical-manual_4665229.webp)
Section 4
1MAC050144-MB C
Protection functions
222
615 series ANSI
Technical Manual
Timer
Once activated, the timer activates the PICKUP output and the phase-specific PICKUP_X
output. The time characteristic is according to DT. When the operation timer has reached
the value set by
Trip delay time
, the TRIP output and the phase-specific TRIP_X output
are activated. If the fault disappears before the module trips, the reset timer is activated. If
the reset timer reaches the value set by
Reset delay time
, the trip timer resets and the
PICKUP output is deactivated.
The timer calculates the pickup duration value PICKUP_DUR, which indicates the
percentage ratio of the pickup situation and the set trip time. The value is available through
the monitored data view.
The BLOCK signal blocks the operation of the function and resets the timer.
4.1.13.5
Signals
Table 217: 37 Output signals
4.1.13.6
Settings
Table 218: 37 Group settings
Table 219: 37 Non group settings
Name
Type
Description
TRIP
BOOLEAN
Trip
TRIP_A
BOOLEAN
Trip phase A
TRIP_B
BOOLEAN
Trip phase B
TRIP_C
BOOLEAN
Trip phase C
PICKUP
BOOLEAN
Pickup
PICKUP_A
BOOLEAN
Pickup phase A
PICKUP_B
BOOLEAN
Pickup phase B
PICKUP_C
BOOLEAN
Pickup phase C
Parameter
Values(Range)
Unit
Step
Default
Description
Current block
value
0.00…0.50
xIn
0.01
0.10
Low current setting to block
internally.
Pickup value
0.01…1.00
xIn
0.01
0.50
Current setting to pickup
Trip delay time
50…200000
ms
10
2000
Trip delay time
Parameter
Values(Range)
Unit
Step
Default
Description
Operation
1=enable
5=disable
1=enable
Operation Disable / Enable
Operation mode
1=Three Phase
2=Single Phase
1=Three
Phase
Number of phases needed to
pickup
Reset delay time
0…60000
Ms
1
20
Reset delay time
Содержание 615 Series ANSI
