ABB 500 Series, Руководство строителя

Страница: 86 / 134

80
Configuring the 56/64 kbit data
communication modules
&KDSWHU
,QVWDOODWLRQRIWKHRSWLFDOFDEOHVLQ
WHUPLQDOVDQGFXELFOHV
7DEOH 6XPPDU\
1R &20)$,/WULJJHULQJ &20)$,/WULJ
JHULQJWLPH
'URSRXW
GHOD\PV 5HPDUN
1 Transmit error
≥
50 ms Messages can not be sent
2 Receive error
≥
100 ms No valid messages received
3 Block differential protection 0 ms Block of the differential protection due to
setting changes etc.
4 Remote terminal COMFAIL 0 ms COMFAIL from the remote terminal. For
error no 1, 2, 3, and no 5, 6, 7, 8, 9, 10
the COMFAIL is sent in the second con-
secutive message (within 10 ms)
5 Time synchronization error
≥
2 s Problems in the synchronization of inter-
nal differential clock in the differential
protection. The clock refers to the syn-
chronized counters 0-39999
µ
s in each
terminal. The clock is independent of
the real time clock in the terminal.
6 Differential clock drift > 0 ms Unacceptable drift of the internal differ-
ential clock in the slave terminal com-
pared to the internal differential clock in
the master terminal (slave- master -
slave)
7 Communication channel
loop delay - instantaneous
0 ms Checks if the loop time (slave - master -
slave) in the differential communication
channel 31 ms
8 Communication channel
loop delay - time delayed
≥
2 s Checks if the loop time (local - remote-
local) in the differential communication
channel 24 ms
9 Abnormal clock deviation 0 ms Internal differential clock deviation
(slave- master - slave)
10 Data flow
2QO\LQYHUVLRQ
0 ms Long time between attempts to send
messages and adjustment of the real
time terminal clock . The terminal clock
is the real time clock in the terminal for
time tagging of events etc.