Abaxis VetScan HM5, Руководство оператора

Страница: 37 / 164

Settings 3-11
3.7 Admin Settings
This menu is available to Admin-level users only ( see Section 7 ). Use Admin Settings to adjust main-
tenance dates to fit the clinic’s schedule, to tailor directions to the tubing set being used, and to set up
user permissions.
1. On the HM5 Home screen, select Settings > Admin Settings .
2. The Pack Setup setting identifies the reagent pack tubing setup: select QCA or Bottle Caps
(see “Installation” on page 2-3 ).
3. Select
Scheduling
and select the schedule for Wash Head Cleaning and Soak Cleaning:

To use the default maintenance schedule, select Disable .

To customize the maintenance schedule and enable full screen reminders for mainte-
nance, select Enable .
4. Then select
Schedule Settings:

The Interval fields can be used to set the number of days
between cleanings. Abaxis recommends that Intervals be
left at the default values of a 7 day Interval for Wash Head
Cleaning and a 14 day Interval for Soak Cleaning. Use the
Cleaning Day/Time fields to set the specific day and time
that cleaning is due. Users who run fewer than 5 samples
per day may set the Soak Cleaning Interval to 30 days.

Use Last Date of Scheduled Maintenance and Mainte-
nance Due Dates
to track the previous and the next
scheduled cleanings.
Note: The default interval settings are ideal for most clinics.
Note: Enabling Schedule Settings allows the user to set the preferred day and
time for maintenance and will not allow samples to be run until main-
tenance procedures have been performed.