manualshive.com logo in svg

abaco systems CPCI-7806, Справочник по аппаратуре, Страница: 80 / 95

Поделиться
Скачать
abaco systems CPCI-7806 Скачать руководство пользователя страница 80

80 CPCI-7806/CPCI-7806RC Pentium/Celeron M Universal CompactPCI Single Board Computer

Publication No. 500-657806-000 Rev. G

If there is a device labeled ‘Universal Serial Bus (USB) controller’ under the ‘Other 
devices’ section in the right pane of the ‘Computer Management’ window, the 
driver has not been installed. To install the driver, right-click on the ‘Universal 
Serial Bus (USB) controller’ and select ‘Update Driver.’ Ensure ‘Install the 
software automatically’ is selected and click ‘Next.’ The Hardware Update 
Wizard will find the appropriate driver and begin installation automatically. Click 
‘Finish.’ Device Manager will relocate the device to the ‘Universal Serial Bus 
controllers’ section in the right pane.

D.2.4 Ethernet Adapter Drivers Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start,’ right-click on ‘My Computer,’ and select ‘Manage.’ In the left 

pane of the ‘Computer Management’ window, click on ‘Device Manager.’

3.

Intel(R) PRO/1000 MT Dual Port Server Adapter.

 Perform this step for each 

of the Ethernet controllers under the ‘Other devices’ section in the right pane 
of the ‘Computer Management’ window. Right-click on the ‘Ethernet 
Controller’ and select ‘Update Driver.’ Ensure ‘Install the software 
automatically’ is selected and click ‘Next.’ The Hardware Update Wizard 
will find the appropriate driver and begin installation automatically. Click 
‘Finish.’ Device Manager will relocate the devices to the ‘Network adapters’ 
section in the right pane.

4. Click ‘X’ to close the ‘Computer Management’ window.

5. Changes may be made to the network configuration as desired.

Содержание CPCI-7806
































































































Отзывы:

Нет отзывов