manualshive.com logo in svg

abaco systems CPCI-7806, Справочник по аппаратуре, Страница: 78 / 95

Поделиться
Скачать
abaco systems CPCI-7806 Скачать руководство пользователя страница 78

78 CPCI-7806/CPCI-7806RC Pentium/Celeron M Universal CompactPCI Single Board Computer

Publication No. 500-657806-000 Rev. G

Double-click on the ‘Applications’ folder. Double-click on ‘infinst_enu.’ Click 
‘OK.’

3. At the ‘Intel Chipset Software Installation Utility’ window, click ‘Next.’ Click 

‘Yes’ to agree to the software license agreement. Click ‘Next.’ At each of the 
following ‘Hardware Installation’ windows, click ‘Continue Anyway.’

4. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish.’ 

The computer will restart.

D.1.3  USB 2.0 EHCI Host Controller

Depending on how the operating system and the latest service pack were 
installed, the USB 2.0 controller driver may or may not be running. Visit 

http://support.microsoft.com

 and search for

 Availability of USB 2.0 Support in 

Windows 2000 SP1

, for more information on this topic.

To determine whether the driver for the USB 2.0 controller is running, right-click 
on ‘My Computer,’ and select ‘Manage.’ In the left pane of the ‘Computer 
Management’ window, click on ‘Device Manager.’ In the right pane, click on the 
‘+’ next to ‘Universal Serial Bus controllers’ to expand the group. If there is a 
‘Standard Enhanced PCI to USB Host Controller’ listed in the group, the USB 2.0 
EHCI Host Controller driver is already running, and no further configuration is 
necessary for the device.

If there is a device labeled ‘Universal Serial Bus (USB) controller’ under the ‘Other 
devices’ section in the right pane of the ‘Computer Management’ window, the 
driver has not been installed. To install the driver, right-click on the ‘Universal 
Serial Bus (USB) controller’ and select ‘Properties’ from the drop-down menu, 
select the ‘Driver’ tab and select ‘Update Driver.’ When the wizard starts choose 
‘Next’ and ‘Search for a suitable driver’ and ‘Next again.’ The Hardware Update 
Wizard will find the appropriate driver and begin installation automatically. Click 
‘Next as necessary then click ‘Finish’ and ‘Close’ to close the divers properties 
dialog box. Device Manager will relocate the device to the ‘Universal Serial Bus 
controllers’ section in the right pane.

D.1.4  Ethernet Adapter Drivers Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Right-click on ‘My Computer,’ and select ‘Manage.’ In the left pane of the 

‘Computer Management’ window, click on ‘Device Manager.’

3.

Intel(R) PRO/1000 MT Dual Port Server Adapter.

 Perform this step for each 

of the Ethernet controllers under the ‘Other devices’ section in the right pane 
of the ‘Computer Management’ window. Right-click on the ‘Ethernet 
Controller’ and select ‘Properties’ from the drop-down menu. Select the 
‘Driver’ tab and select ‘Update Driver.’ When the wizard starts ensure 
‘Install the software automatically’ is selected and click ‘Next.’ The 
Hardware Update Wizard will find the appropriate driver and begin 
installation automatically. Click ‘Finish.’ Device Manager will relocate the 
devices to the ‘Network adapters’ section in the right pane.

4. Click ‘X’ to close the ‘Computer Management’ window.

5. Changes may be made to the network configuration as desired.

Содержание CPCI-7806
































































































Отзывы:

Нет отзывов