ab Solares Smart Spa, Руководство по эксплуатации

Страница: 18 / 40

Solares™ Smart Spa Bathing System Operating Manual
CD0036 - 18 - 1121
Operation In Detail
Universal Buttons:
Goes to Home Screen
Goes to last visited page
HMI Setup-Time & Brightness
Time and brightness settings can be accessed by
navigating to the HMI’s system settings. To
reach the system settings:
1. Hold your finger down on an open portion
of the screen for a couple of seconds until
the following menu appears.
2. Press “Show System Settings”
Once you have reached the system settings
menu, you navigate through dragging the
options bubble on the left of the screen up and
down until the option you desire is in the
middle. You can leave the menu at any time by
hitting the x in the top right corner or navigating
to “Close.”
Setting Time:
1. Navigate to “Time” and click on it to make
the Date/ Time Properties window appear.
2. Choose your time zone from the Time
Zone dropdown.
3. Set the current time hitting by “ Keypad ”
and then tapping the hour/ minute under
Current time and entering the desired
value. It can be difficult to do this with
your finger, so a plastic stylus or a round
piece of plastic can be used.
4. Hit “Ok” to finish. It is worth noting that
the system will need to be restarted for
the correct time to show on the HMI.
Brightness Settings:
You can adjust the backlight brightness and idle
duration by navigating to the display settings
menu. The tub is automatically configured to
dim the backlight after 15 minutes of inactivity
to extend the life of the display, but this can be
adjusted in this menu. You can also adjust the
brightness of the backlight by clicking on the
brightness tab and moving the slider.