manualshive.com logo in svg

AB Sciex QTRAP 4500 LC/MS/MS system, Руководство пользователя системы, Страница: 10 / 138

Поделиться
Скачать
AB Sciex QTRAP 4500 LC/MS/MS system Скачать руководство пользователя страница 10

Operational Precautions and Limitations

4500 Series of Instruments

System User Guide

10 of 138

RUO-IDV-05-0264-A

Regulatory Compliance

This system complies with the standards and regulations listed in this section. Applicable labels 

have been affixed to the system.

Australia and New Zealand

•

Electromagnetic Interference

—AS/NZ

 

CISPR 11 (Class A)

•

Safety

—AS/NZ 61010-1

Canada

•

Electromagnetic Interference

—CAN/CSA CISPR11. This ISM device complies 

with Canadian ICES-001.

•

Safety

—CAN/CSA C22.2 No. 61010-1, and CAN/CSA C22.2 No. 61010-2-061

Europe

•

Electromagnetic Compatibility

—

Electromagnetic Compatibility Directive 

2004/108/EC, as implemented in these standards:

•

EN 55011 (Class A)

•

EN 61326-1

•

Safety

—

Low Voltage Directives 2006/95/EC as implemented in these standards:

•

EN 61010-1

•

EN 61010-2-061

•

WEEE

—

Waste, Electrical, and Electronic Equipment Directive 2002/96/EEC

United States

•

Electromagnetic Interference, FCC Part 15, Class A

—This equipment has been 

tested and found to comply with the limits for a Class A digital device, pursuant to 

Part 15 of the FCC (Federal Communications Commission) Compliance Rules. 
These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. This 

equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the operator’s manual, can cause harmful 

interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 

interference in which case you will be required to correct the interference, at your 

own expense. Changes or modifications not expressly approved by the 

manufacturer could void your authority to operate the equipment.

•

Safety

—UL 61010-1, IEC 61010-2-061

Содержание QTRAP 4500 LC/MS/MS system











































































































































Отзывы:

Нет отзывов