background image

Field Wire Conversion Module for Modicon B825-016 to 1756-IB16

(Cat 1492-CM800-LD008)

10000021883 

(Version 00)

Printed in Germany

Local language (French, Italian, German & Spanish) versions of this document can be downloaded by going to www.ab.com. 
In the left margin click on Publications Library and Literature Library.  In the Search Area (right margin), Search by Catalog 
Number and in the Search box type in the catalog number of the conversion system component.

I. Module Description

The 1492-CM800-LD008 conversion module provides field wire signal conversion from a Modicon® B825-016, 20 to 
28Vdc, 16-pt input module to a ControLogix 1756-IB16, 10 to 31.2Vdc, 16-pt input module. The conversion module 
provides the mating connections to the B825-016 swing-arm (terminal block) with the attached field wires. It routes 
those signals, via its 20-pin connector and a 1492-CABLE

X pre-wired cable to compatible terminals of the 1756-

IB16  (refer to the Wiring Diagram on page 2).  

II. Module Installation

The 1492-CM800-LD008 conversion module must be installed in a 1492 conversion base-plate and cover-plate assem-
bly. The installation of the module into the assembly is explained in the Installation Manual that ships with the conversion 
assembly. For a list of compatible assemblies refer to Appendix A.

 

III. Conversion Module Compatibility Matrix

 This is the cable length in meters and tenths of meters (e.g. 015 = 1.5 meters). Recommended cable 

length is 003 (00.3 meters). 

 

20-Pin Connector for 1492-CABLE

X

Mating Connector for
B800 Terminal Block

Conversion Module

 

Compatible 800

Input Module 

 

Compatible 1756

Input Module 

 

Required  1492 Cable

 

1492-CM800-LD008

B825-016

1756-IB16

1492-CABLE

X

1492-CM800-LD008 Conversion Module

De-energize and lockout any and all power to all I/O field devices connected to the Modicon 800 I/O 
housing, and the power to the 800 I/O housing itself. Ensure all power is de-energized and locked out to 
any device in the control cabinet where the conversion is to be performed.  Ensure work is performed by 
qualified personnel.

WARNING

Содержание 1492-CM800-LD008

Страница 1: ...16 refer to the Wiring Diagram on page 2 II Module Installation The 1492 CM800 LD008 conversion module must be installed in a 1492 conversion base plate and cover plate assem bly The installation of the module into the assembly is explained in the Installation Manual that ships with the conversion assembly For a list of compatible assemblies refer to Appendix A III Conversion Module Compatibility ...

Страница 2: ...stallation Manual wiring schematics and diagrams for more details Reference Doc 41170 758 Version 03 9 1 1 19 2 3 3 4 4 5 5 6 6 7 7 8 8 9 19 10 11 11 12 12 13 13 14 15 15 16 16 17 17 18 18 20 14 2 Input 13 Input 15 Input 14 Input 16 Input 5 Input 7 Input 6 Input 8 Input 1 Input 3 Input 2 Input 4 Input 9 Input 11 Input 10 Input 12 Common Common 10 20 Common 24 VDC 10 GND 0 IN 0 1 IN 1 2 IN 2 3 IN 3...

Страница 3: ...40 to 85 C 40 to 185 F Operating Temperature 0 to 55 C 32 to 131 F Operating Humidity 5 to 95 at 55 C non condensing Shock Non operating Operating 50g 30g Operating Vibration 2g 10 500Hz Maximum Operating Voltage 150 Vdc Max Module Operating Current Per Point Per Module 2 Amps 1492 CABLE connection pins are limited to 2A per pin 12 Amps Agency Certifications UL Classified Under UL File Number E113...

Страница 4: ... Housing Width dimension includes the 1756 Chassis power supply Surplus Chassis width as compared to the 800 I O Housing is divided equally when mounting it on the Conversion Assembly Mounting holes for the 1756 I O Chassis are pre drilled and pre tapped into the Conversion Assembly cover plate Modicon is a Registered Trademark of Group Schneider AS H810 xxx AS H819 103 AS H819 209 AS H819 100 AS ...

Отзывы: