16 Slots Universal
Media Converter Rack
User's Guide
Copyright Statement
This publication may not be reproduced as a whole
or in part, in any way whatsoever unless prior
consent has been obtained from owner
FCC Warning
The 16 Slots Universal Media Converter Rack has been
tested and certified within Class A digital
specifications under Part 15 of FCC Rules. These
standards are designed to provide reasonable
protection from harmful interference when these units
are used in a commercial environment.
These devices can use, generate, radiate radio
frequency energy, and may cause harmful interference
to radio communications unless installed in accordance
with the instructions in this User's Guide.
Operation of this device in a residential area is likely
to cause harmful interference which will make the
user responsible for the appropriate remedial action
at his/her expense.
CE Mark Warning
The
is a
Class A product. In some domestic environments it
may cause radio interface in which case the user will
need to consider adequate preventative measures.
16 Slots Universal Media Converter Rack
Trademarks
Contents subject to revision without prior notice.
All trademarks remain the property of their
respective owners
2.0 Installation
2.1 Rack Mounting
The
can be
mounted in a standard EIA 19-inch rack. Begin by
aligning the mounting brackets along the sides of the
unit with the slit over the holes. Secure the screws
tightly to fit the brackets to the device before fixing it
into the 19-inch rack. Please ensure that the
ventilation holes are not obstructed. The step by step
procedure is shown on the next page.
2.2 Media Converter
1. Screw upper & lower sliders on the media converter.
2. Carefully align the slider and slideway, then press
them with firm and steady pressure.
2.3 Cabling
1. The correct cable specifications and distances will
be listed in the media converter documentation.
2. Connect input media cable to the front of
( the now installed ) media converter.
2.4 Powering
1. Connect the female end of the power cord to the
MCR.
2. Connect the male end of the power cord to an
external AC outlet.
3. The power A, B LED's on the Rack will illuminate
on installation
4. Similarly, the power indicator LED's on the media
converter will illuminate when installation is
complete.
16 Slots Universal Media Converter Rack
1. Introduction
The Media Converter Rack,
Converter Rack is designed to accommodate sixteen
separate and independent media converters within a
rack-mountable rack.
The 16 Slots Universal Media Converter Rack is fitted
with two hot-swappable power supplies and three
hot-swappable fans for enhanced reliability. This
means that if one supply fails, the other is capable of
taking over immediately.
The other benefit is when there’s power supply or fan
failure. The user simply replaces the failed unit with
another one without taking down the whole 16 Slots
Universal Media Converter Rack.
Power status is shown on the LED display enabling
the user to monitor and respond as necessary.
For optimum performance, please ensure that the
16 Slots Universal Media Converter Rack is seated in a
well-ventilated position, enabling air to circulate
above and below the unit
The 16 Slots Universal Media Converter Rack can also
be installed in a standard 19-inch site rack; provision
has been made for the appropriate connecting brackets.
The Media Converter Rack has been designed
to house only our proprietary range of media
converters. Any other configuration is at the
users own risk.
16 Slots Universal Media
3.0 Specifications
Slot number
16 slots
LED
Power A Activity
Power B Activity
Redundancy
2 Hot-swappable redundant Powers
Power
Slide-in Power Module:
Input AC 110V or 240V
Output DC 5V
Power Consumption:
Empty Loading: 9.5W
Typical Operation & Storage Temperature
Operation:0 ~ 50°C
Storage Temperature: -20° ~ 60°C
Humidity:5% ~ 90% non-condensing
Dimension and Weight
Size: 440 x 385 x 88 mm (WxDxH)
Shipping Weight:
16 Slots Media Converter Rack:8.5KG
Slide in AC Power Module:1.1KG
Emission/Safety:
EMI : FCC Class A, CE
* For further reports, please contact us for update.
Strongly Recommend:
To ensure the best performance of
standalone media converters, please
keep your environment temperature
under 40 degrees Celsius.
Or , install two power modules on your
16 Slots Universal Media Converter Rack
aa
eon
FCU-RACK16
Ver:1.4
AAXEON TECHNOLOGIES, LLC
www.aaxeon.com
