manualshive.com logo in svg

Aastra OpenCom 100, Руководство по монтажу и пусконаладке

Поделиться
Скачать
Aastra OpenCom 100 Скачать руководство пользователя страница 30

Installation

Installing an Expansion Set

28

1.

Turn off the OpenCom 130. Unplug the plug-in power supply from the socket. 
You should not install the expansion module or install or uninstall additional 
interface cards while the OpenCom 130 is turned on.

2.

Open the housing cover of the OpenCom 130. In this case, carefully follow the 

Safety Precautions

 starting on page 25.

The existing basic module is mounted in the left half of the housing. No com-
ponents may be mounted in the right half of the housing.

3.

Place the expansion module in the intended mounting location in the right 
half of the housing. Be sure to align the 96-pin connector properly to the jack 
on the basic module. Push the expansion module towards the basic module so 
that both modules are securely connected to one another via the 96-pin con-
nector.

Installing the expansion module

4.

Carefully press the expansion module at the top and bottom right, pushing it 
into the locking hooks provided (see “A” and “B” in the diagram). Secure the 

Slot 1

Slot 2

Slot 3

4

1

2

3

A

B

Содержание OpenCom 100





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды