System Functions and Features as of I7.9
Routing elements
83
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
Initialization Settings
•
After initialization, route 1 is allocated trunk groups 1 and 2.
•
After initialization, route 3 is allocated trunk group 1
(route for remote alarming).
•
On 2025 and 2045 systems all routes are allocated the numbers from 170 up-
wards in the numbering plan.
•
On the 2065 system the first 30 routes are allocated numbers from 170 upwards
in the numbering plan.
Ascotel® IntelliGate® Net:
In an AIN the local network interfaces of nodes can be prioritised for each
route. (Setting CM_2_1_4, parameter
Use network interfaces on the node
first
). This allows outgoing calls to PISN or GSM users to be routed prima-
rily via the system’s own network interfaces, thereby saving VoIP
resources.
4. 3. 3
Other Routing Functions for Outgoing Calls
Restricting Calls Outgoing Simultaneously
The
Outgoing connections
setting is used to specify the number of outgoing calls
that are possible simultaneously. Once the limit has been reached, users can no
longer make outgoing calls with the allocation of this route. This is signalled by
means of the congestion tone.
Activating / Deactivating External Digit Barring
Normally an outgoing call is compared with the external digit barring allocated in
the user configuration.
The
External digit barring
setting is used to deactivate the external digit barring for
each route. This is useful when a route is set up for calls into the private leased-line
network.
Deleting the exchange access prefix
If the call number of an outgoing call has an exchange access prefix, it will be trun-
cated before the call is forwarded.
