Aastra Dialog 4425 IP Vision Скачать руководство пользователя страница 95

Страница: 95 / 224

MD Evolution – Dialog 4425 IP Vision

Call Forwarding Services

Your extension also offers you various call forwarding services that

enable you to direct incoming calls to another internal or external

destination, whenever you are absent and/or busy, travelling, or

when you simply would rather not be disturbed.
The following different types of services are available:
•

Call forward on no-answer condition: Your calling parties will be

re-directed to the pre-defined call forward recipient, whenever

you do not answer their calls, typically after a 20-second delay.

•

Call forward on busy condition: Your calling parties are imme-

diately re-directed to the pre-defined call forward recipient

whenever your extension is busy.

•

Call forward on no-answer and busy conditions: Your calling

parties are re-directed to the pre-defined call forward recipient

in both cases.

•

Immediate call forward: All incoming calls are immediately re-

directed to the pre-defined call forward recipient. Typically, this

could be your secretary’s internal number, or your external mobile

phone number when you are travelling.

•

“Do not disturb” call forward: Your extension is unavailable,

although no real forwarding of your calls is activated. Your

internal party’s calls are immediately disconnected, and your

“Do not disturb” status is displayed on extensions that feature a

display screen. Calls from your external parties are immediately

re-directed to your facility’s attendants with the indication of

your “Do not disturb” status.

•

Call forward on mini-message: Your extension is unavailable,

although no real forwarding of your calls is activated. Your

internal parties, and possibly your external parties, receive the

display of an “Absent” message that you have pre-recorded.

The number to which a call forward may be directed can be an

internal party’s individual extension, a hunt group, another user’s

personal group, or even the access number for an integrated voice

mail system that your facility may use. See the “

Voice Mail Services

”

section.

Содержание Dialog 4425 IP Vision
































































































































































































































Результаты поиска

Содержание Dialog 4425 IP Vision

Отзывы:

Бренды по названию

Популярные бренды

Aastra Dialog 4425 IP Vision, Руководство пользователя

Результаты поиска

Содержание Dialog 4425 IP Vision

Отзывы:

Бренды по названию

Популярные бренды