Aastra Dialog 4425 IP Vision Скачать руководство пользователя страница 104

Страница: 104 / 224

Call Forwarding Services

MD Evolution – Dialog 4425 IP Vision

104

Deactivating a Call Forward Pre-Defined
on the Call-Fwd Key

On the other hand, to deactivate a pre-defined call forward

assigned to the Call-Fwd (call forward) key on your extension:

Call-Fwd

Simply press the Call-Fwd key on your extension, which
initially is turned on.

The pre-defined call forward is immediately cancelled, and confirmed

to you with the service acceptance tone, and the display of “CANCEL

ACCEPTED CALL FORWARD” message on your extension’s

screen.

Call-Fwd

This change in status will also cause your extension’s Call-Fwd key

LED to turn off. In your extension’s service programming menu, the

“UNACTIVE” status is also displayed to the right of the “2 Call

forward” option.

Call Forward on Mini-Message or Absence

As an alternative to all other available variable call forwarding services

(referred to above), you may also re-direct your extension to a mini-

messaging or call forward on absence service.
This does not consist of a call forward in its truest sense: your

incoming calls are not re-directed.
Rather, the absence message that you selected when defining the

call forward will be automatically transmitted to all internal and

external parties who are trying to reach you, in the form of an ISDN

mini-message, as long as that party’s phone is compatible with the

service. His/her call will be disconnected once the message has

been displayed.
For this purpose, your facility may make 10 pre-formatted mini-

messages available to you, or you may also create personalised

messages.

Содержание Dialog 4425 IP Vision
































































































































































































































Результаты поиска

Содержание Dialog 4425 IP Vision

Отзывы:

Бренды по названию

Популярные бренды

Aastra Dialog 4425 IP Vision, Руководство пользователя

Результаты поиска

Содержание Dialog 4425 IP Vision

Отзывы:

Бренды по названию

Популярные бренды