Aastra Dialog 4422 IP Office, Руководство пользователя, Страница: 95 / 151

95 MD Evolution – Dialog 4422 IP Office
More Features of Your Extension
ACCOUNT C.
z
Then, directly dial the account code to which your external
call should be imputed.
Account code formats are a fixed length. All account codes are
typically 4 digits, however they may reach up to 15 digits in length.
Generally, they end with “#”, which acts as a separator. In all cases,
account codes are defined by your system administrator.
EXT. NO
z
Next, dial the desired external phone number.
Â
Press the Loudspeaker key on your extension.
Your outgoing external call is then transmitted over the public
network, just as an external call without an account code would be.
Thus, the call detailed record will not only contain the date, time,
number called, length, and cost of the call, but also the account
code that you entered. This then can be used to invoice your clients.
Notes:
The implementation of this specific service assumes that
your facility uses the Least Cost Routing (LCR) method for
external calls. It also assumes that, at the very least, these
outgoing calls are subjected to call detailed records that are
managed within an external charging server. Contact your
system administrator for more information. He/she will also
provide you with the accepted account code format.
As indicated, your extension is equipped with a charge
counter that accrues a cumulative total of the charges for
your outgoing calls. Your system administrator or facility’s
attendants have the ability to consult any charge counter.
If necessary, contact them for more details.
Your extension may also be subject to call detailed records.
This usually involves your outgoing external calls, however
they may also refer to your internal and incoming calls. These
records save the details for each involved call: number called,
date and time, length, etc. These records are generally used
by your system administrator to monitor your telephone
facility’s invoicing. If necessary, contact your system
administrator for more details.