Getting Started
41-001390-00 Rev 02 – 12.2011
1-10
Getting Started
This section describes the behavior and startup screens you will see when you plugin and login to your BluStar 8000i.
Plugging In and Starting the BluStar 8000i
When the user plugs in their BluStar 8000i it will turn on automatically and show the login screen. The BluStar 8000i goes
through the following startup process when you plug it in.
During startup, the BluStar 8000i checks for any configuration changes or if new firmware updates are available. Once the
BluStar 8000i is turned on and ready to go, the login screen appears.
Logging In
In order to access your personal settings and use all of the BluStar 8000i applications, you must first login to the terminal.
You can login using your
username
and
password
OR by using the
fingerprint reader
.
In order to use the fingerprint reader, you must first login using your username and password and add your fingerprint to
your account in the
tools
menu (see
for more information)
.
Note:
Users can make calls and access certain applications without logging in. Users must login to access their favorites and
other personal settings.
