Menu tree
5
Menu tree
The purpose of the menu tree
The menu tree illustrates the structure of the System Assistant, giving you quick access to the setting
options.
In the menu, you can go from the System Assistant's root to the individual branches. From there you can
reach the sub-branches, at the end of which you can adjust the settings you want. To reach the first two
branches (menu levels), simply key the digit indicated. The phone's display will show you how to reach
other branches. The procedure is also described in these Instructions. The structure of the Instructions is
based on the menu tree.
1:ABBREV. DIALLING
ABBR.DIAL.NO.
2: NAME
3: PHONE NUMBER
2:DESTINATIONS
1: CALL.DISTR.CONF.
1: NAME
DDI NUMBER
SWITCH POS. 1
SWITCH POS. 2
SWITCH POS. 3
2: EMERGENCY NO.
1: SWITCH POS. 1
2: SWITCH POS. 2
3: SWITCH POS. 3
3: CODED CALLS
1: CODED CALL 1
2: CODED CALL 2
3: CODED CALL 3
4: CODED CALL 4
5: CODED CALL 5
4: DO NOT DISTURB
1: CALL DIV. TO
5: SUBSTITUTION
1: GENERAL CALL
2: SUBSTITUTION
6: CONFERENCES
1: MEMBER 1
2: MEMBER 2
3: MEMBER 3
4: MEMBER 4
5: MEMBER 5
7: HOTLINE
1: HOTLINE 1
2: HOTLINE 2
3: HOTLINE 3
4: HOTLINE 4
5: HOTLINE 5
8: DOORBELL
1: SWITCH POS. 1
2: SWITCH POS. 2
3: SWITCH POS. 3
9: CAPOLINEA
3:SUBSCRIBER LIST
4:SUBSCRIBER CONF.
1/31:NAME
2: BUSY INDICATOR
3: HOTLINE
4: PREDEFINED DIV
2/31:FIRST-CALL DIV.
2: PREDEF. FORW'D
3: FORW'D ON BUSY
4: PAGER SC-NO
3/31:CALL PATTERN
2: COST CENTRE
3: DIGIT BARRING
4: TERMINAL BARR.
5: GUEST UNTIL
4:SUBSCRIBER CONF. (PISN)
1: NAME
2: ROUTE
3: PISN-SC-NO
4: CLIP SELECTION
5:BUSY INDICATOR
VARIANT 1
VARIANT 2
VARIANT 3
...
6:SERVICE CONFIG.
1: PRINT ALL
2: PRINT W/O A.DIAL
3: MAINTENANCE
1: STATUS
2: SYSTEM FAILURES
3: POWER FAILURES
4: EVENT MESSAGES
