IP P
HONE
FOR
MX-ONE
43
6/1553-DBC 446 01 Uen G 2012-02-22
7.5
Sending Caller Identity Code at Transfer
(Available in H.323 phones only)
When you transfer a call, you can send the caller’s Identity Code (CID)
or number to the receiver’s display by dialing a feature code during an
external call.
To send a caller identity code during an ongoing external call, do the
following:
1)
Put the ongoing external call on hold by pressing
Inquiry
and wait
for a dial tone.
2)
Dial
* 77 * caller identity code or number #
(1-20 digits) and wait for
a dial tone.
3)
Call the third party.
4)
Tap
Transfer
to transfer number. The ongoing call is transferred
with the caller's Identity Code or number.
Note:
You can only use this feature if the receiver’s phone is
programmed to handle Identity Codes. Contact your system
administrator.
7.6
Suffix Dialing (Dialing During Speech)
When communicating with and controlling a voice mail system, or when
retrieving information about your bank account through your phone, you
must use Dual Tone Multi-Frequency (DTMF) signals, also known as
suffix dialing. The suffix dialing function is always active for all calls in
speech.
All digits entered are automatically converted by the exchange into
DTMF signals, which then are transmitted along the connected lines.
8
Call Forwarding
Follow-me is a feature that lets you divert all calls to an internal extension
or to an external phone number of your choice.
