If your phone does not display call destination information, your System Administrator may have disabled this feature.
Contact your System Administrator for more information.
Indication of Terminated Calls
An Administrator can configure your phone to display a disconnected screen (“Call Terminated”) when the far-end
hangs up. An audible busy signal is also heard on the phone. The configuration of this feature can also include the maxi-
mum time interval that the busy signal is audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 6735i if this feature is enabled on your phone:
Notes:
When both call diversion and call destination are enabled, the information displays to the phone’s screens in the fol-
lowing order:
Screen 1
Caller info
Screen 2
Call destination
Screen 3
Call diversion
IF
THEN
1 line active and far-end disconnects,
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen.
the line not in focus:
plays busy tone.
2 or more lines active, and far-end disconnects,
the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
the busy tone stops
the disconnected screen disappears.
2 or more lines active, and a line NOT in focus is disconnected
by the far-end,
no busy tone plays
no disconnected screen displays
no “Call Terminated” message displays
L1
6735i
Call Terminated
