Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV00 – 07.2011
110
Using the Lock/Unlock Key on the IP Phone
After configuring a key as a lock/unlock key, refer to the following procedure to use the key on the IP phone.
Lock the Phone
Unlock the Phone
Paging Key (Sends the RTP Stream)
You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol (RTP) stream to pre-
configured multicast address(es) without involving SIP signaling. You enter a multicast IP address(es) and a port number
for the Paging key, that when pressed, initiates an outgoing multicast RTP session. This is called Group Paging on the IP
phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams. You can specify
up to 5 listening multicast addresses at the path,
Basic Settings->Preferences->Group Paging RTP Settings
.
For more information about Group Paging and how it works, and to specify multicast addresses, see
on
.
5.
In the "
Type
" field, select
Phone Lock
from the list of options.
Expansion Module Keys
6.
Select from “
Key 1
” through “
Key 36
” (M670i).
or
Select from “
Key 1
” through “
Key 60
” (M675i).
7.
In the "
Type
" field, select
Phone Lock
from the list of options.
8.
Click
Save Settings
.
Note:
You can lock/unlock the phone using the new key you just configured, using the Aastra Web UI at the path
Operation-
>PhoneLock
, or using the "
Phone Lock
" option on the IP Phone UI at the path
Options->Phone Lock
. For more informa-
tion about using the lock/unlock feature, see
.
1.
Press the
LOCK
key.
The phone locks.
The LED for the key AND the Message Waiting Lamp illuminate steady ON. An “Unlock” label appears next to the key
you just pressed.
2.
Press the
UNLOCK
key.
A password prompt displays.
3.
Enter your user password and press
ENTER
.
The phone unlocks.
The LED for the key AND the Message Waiting Lamp go OFF. The “Lock” label appears next to the key you just pressed.
