Welcome
41-001451-00 REV00 – 07.2011
2
Requirements
The 6735i IP Phone requires the following environment:
•
SIP-based IP PBX system or network installed and running with a SIP account created for the 6735i IP phone.
•
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or
Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
•
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)
•
Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance)
•
Power source
–
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
–
For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No
48v AC power adapter required.)
–
For Ethernet networks that DO NOT supply power to the phone:
–
(optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is avail-
able as an optional accessory from Aastra Telecom. Contact your Administrator for more information.
Installation and Setup
If your System Administrator has not already setup your 6735i phone, please refer to the
Aastra 6735i Installation Guide
for basic installation and physical setup information. For more advanced administration and configuration information,
System Administrators should refer to the
Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.
