Aastra 6735i Скачать руководство пользователя страница 164

Страница: 164 / 219

Managing Calls

157

41-001451-00 REV00 – 07.2011

CFWD in Phone Mode

Use the

RIGHT

and

LEFT

arrow keys to scroll through each account.

In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone.
Screenname1, 2 and 3 have “

CFWD All

” enabled.

Note:

In ”Phone” mode, when you change the call forward configuration for an account, the change applies to all accounts.

Press the

Call Forward

key. The Call Forward menu displays. Use the

and

DOWN

arrow keys to scroll through each

state type.

In the above example,

CFWD All

is enabled as indicated by a check mark (



CFWD Busy

is enabled but no call

forward phone number is configured as indicated by a

, and CFWD No Answer is disabled, as indicated by an

Select a state using the

and

DOWN

arrow keys.

You can enable/disable a specific account on the phone with any or all of the following states. However, the configu-
ration you set will apply to all accounts on the phone.

•

All

- Enables

CFWD All

on the phone and forwards all incoming calls to the specified number.

•

Busy

- Enables

CFWD Busy

on the phone and forwards incoming calls to a specified number if DND has been

enabled OR if the phone is currently engaged in another call.

•

No Answer

- Enables

CFWD NoAns

on the phone and forwards incoming calls to a specified number if the call has

not been answered for the specified number of rings.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/or if the account has DND enabled), the

CFWD

All

settings take precedence over

CFWD Busy

and

CFWD NoAns

You can also use the following keys if required:

•

All Off Key

- Disables all CFWD modes.

•

All On Key

- Disables all CFWD modes.

•

CopytoAll Key

- Copies the call forward phone number and state of the Call Forward mode (All, Busy, No Answer)

in focus to every Call Forward mode. For example, if you have the cursor pointing at the “

All

” state and it is enabled

and has a call forward phone number configured, pressing the

CopytoAll

Key enables the

Busy

state and the

NoAns

state and assigns the same phone number to both states.

•

Cancel Key

- Cancels any configuration you may have made without saving. To cancel a configuration, you must

press this

CANCEL

key before pressing the

DONE

key.

Tues Jan1 10:00am

Services
Dir
Callers
L1

- Call Fwd

Screenname1

CFWD All

Tues Jan1 10:00am

Services
Dir
Callers
L2

- Call Fwd

Screenname2

Tues Jan1 10:00am

Services
Dir
Callers
L3

- Call Fwd

Screenname3

CFWD All

Call Forward Mode

- Change
- All Off
- All On

Cancel -
Done -

CopytoAll -

1. All
2. Busy
3. No Answer

Services
Dir
Callers

Indicates

CFWD Enabled

CFWD Disabled

Indicates

no CFWD phone

number configured

Call Forward

Mode Screen

Содержание 6735i




























































































































































































































Результаты поиска

Содержание 6735i

Отзывы:

Похожие инструкции для 6735i

Бренды по названию

Популярные бренды

Aastra 6735i, Руководство пользователя

Результаты поиска

Содержание 6735i

Отзывы:

Похожие инструкции для 6735i

Бренды по названию

Популярные бренды