Getting Started
41-001451-00 REV00 – 07.2011
6
If your phone did not successfully connect to the network, the "
Network Disconnected
" prompt appears on the display
and the telephone status light turns on.
Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect
when it is reconnected and displays the "
Network Connected
" prompt for a few seconds. However, if changes have been
made to your phone’s network settings, you may need to restart your phone.
For more information about connecting your phone, see the
Aastra 6735i IP Phone Installation Guide,
the section "
Con-
necting to the Network and to Power
".
Check with your system or network Administrator for assistance.
Idle Screen
When the phone has successfully updated the configuration and connected to the network, the phone displays the
Idle
State
screen. The idle screen is shown whenever your phone is not in use.
The
Idle State
screen lists your name (SIP screen name) and day, date, and time. In the above screen, the "L1" indicates
John Smith is configured on Line 1.
Note:
If the phone displays "No Service" you can still use the phone but it is not registered with the Registrar. For more infor-
mation about registering your phone, see your System Administrator.
Note:
Your System Administrator sets up your SIP screen name, line number, and any other administrative features required.
If your name does not display on the screen, contact your System Administrator.
L1
John Smith
Sat Jan 1 12:18am
Network Disconnected
L1
John Smith
Sat Jan 1 12:18am
