26/1531-ANF 901 14 Uen E10 2014-01-22
21
H
OW
TO
S
TART
A
N
EW
P
HONE
•
Web UI
. The extension number and the PIN code (if used) are
defined via the web user interface. The telephone will always be
logged on. The user cannot log off the telephone. To set the exten-
sion number and PIN via the web UI:
Advanced Settings > Line 1 > Basic SIP Authentication
Settings
Fill in the Phone Number and Password (PIN code if this shall be
used)
•
Telephone UI
. The extension number and the PIN code (if used)
are defined in the telephone user interface. The telephone will
always be logged on. The user cannot log off the telephone. To set
the extension number and PIN from the phone UI:
Press
(Options
key)
>Administrator Menu > SIP Settings
> User Name
and
Password
(if PIN code is used)
7.3.1
Log on with Soft key
The procedure for logging on to MX-ONE is described in the Quick
Reference Guide for each telephone model.
The necessary settings in the configuration files for this are created auto-
matically when using MTS. In the configuration file
aastra.cfg
the
following parameters must be enabled:
dynamic sip:1
sip line1 user name: “Not configured” *)
sip proxy ip: 192.168.10.10
sip proxy port: 5060
sip registrar ip: 0.0.0.0 **)
sip registrar port: 5060
action uri startup: http://$$PROXYURL$$:22222/Startup?user=SIPUSERNAME$$ ***)
*) this line is used in the case of emergency calls when the telephone is
not registered. It is also used in the case of register with the *11 proce-
dure.
**) shall be set to 0.0.0.0 because the system will replace the zeros with
the actual IP address to the registrar as a part of the registration proce-
dure.
***) the terminal will show the prompt with user and password at startup
of the telephone.
In the
<model>.cfg
file, the following parameters must be enabled:
softkey5 label: “Log on”
softkey5 type: xml
softkey5 value: http://$$PROXYURL$$:22222/Logon
