Personalizing your phone
82
Aastra 610d
eud-1290/1.2 – R3.0 – 04.2013
Activating range alarm and system busy beep
You want to set the system parameters with your cordless phone.
The
Range alarm
indicates that the connection between your phone and the system is
weak. You can set the phone so that you receive a warning signal if you leave the cov-
erage area
You are making a call and are getting near the limit of the radio area: A warning signal
sounds in the loudspeaker and the LED indicator is flashing red. If you leave the radio
area, the call is disconnected.
The
System busy beep
tells you that the system is overloaded – you need to wait until
the system is available again.
Setting the server alarm
Depending on the system’s settings, you can receive server alarms for specific situa-
tions. These settings are made by your system administrator in the system. Contact
your system administrator for more information.
When the server alarms are activated in the system, you can select from the alarm sig-
nalling as follows:
Progressive ring tone
,
Suppress ring tone
.
A
List of melodies
(incl. the alarm melodies) is available to listen to.
Press the navigation key to the right or the
Menu
softkey.
Settings
Scroll to
Settings
and press the
Select
softkey.
General
Scroll to
General
and press the
Select
softkey.
Range alarm
/
System
busy beep
Scroll to
Range alarm
/
System busy beep
and use the
Select
softkey to switch on
or off.
Note:
Your settings for
Suppress ring tone
can be overruled by the alarm server.