Supplementary features
Aastra 610d
67
eud-1290/1.2 – R3.0 – 04.2013
Activating ring alone
You wan to specify which of your phone shall ring when you receive a call.
When your system administrator has set up a phone number with several phones
(One-number user concept, see chapter
, page
), you can
define on which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deacti-
vated for all other phones ( ). An incoming call is signalled in the display of all
phones. You can answer the call on each of your phones.
This function must be stored under a function key (see chapter
).
Note:
When you have activated ring alone but deactivated the personal call routing for a
phone in parallel, an incoming call is not acoustically but only visually signalled.
Ring alone
In the idle state:
Press the function key for
Ring alone
.
➔
Ring alone is activated/deactivated.
