Using the display and operating elements
Aastra 610d
33
eud-1290/1.2 – R3.0 – 04.2013
Undoing actions
To cancel operating steps, proceed as follows:
Activate/deactivate function
You can enable or disable a function or a menu entry by selecting the entry you want
and pressing the
Select
softkey.
Resetting activated features
You can deactivate again all the activated functions (e.g.Forwarding).
Exit editor without changes:
Press the End key.
Scrolling back through the menu step by step:
Press the Correction key.
Back to the idle state in the menu:
Press the End key.
Select
Activate/deactivate function:
Press the
Select
softkey.
Press the navigation key up.
➔
Menu
Activated features
is opened.
Or:
Activated features are also available via the menu:
Menu
>
Activated features
.
Reset
Press the
Reset
softkey to deactivate the function you want.
➔
The function is now deactivated.