Routing elements
159
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
The configuration as a two-company system only affects the display on the opera-
tor console. The following points need to be taken into account to ensure that the
two-company operation is clearly separated:
• Use a separate direct dialling plan for each company.
• Allocate separate cost centres for each company.
• Use an internal digit barring,
– if internal traffic between the companies is not possible.
– to prevent outside cost centres from incurring charges through cost centre
selection or route selection.
Fig. 65
Display on the operator console Office 45 in two-company mode
Routing an Incoming Call to the operator console
The company allocation of a call depends on the setting in the relevant call distri-
bution element (see
"Other Functions and Settings of the CDE", page 136
).
Routing an Outgoing Call from the operator console
External outgoing calls from Company A are routed via route 1; external outgoing
calls of Company B, via route 2.
Call Logging of Calls on the Operator Console
Call data, whether incoming or outgoing, is not logged separately according to
company.
Default setting
Upon initialization all call distribution elements are configured for Company A
(single-company system).
