52
Setting up a SIP server
You can store the accounts of up to five different WLAN networks in your handset. The data required
for this is all stored as accounts in a list from which a server can be selected. The data for the SIP
account is defined by the system administrator.
E
Press
.
F
Select
and confirm using
.
F
Select
and confirm using
.
F
or
F
Press
, select
and confirm with
. Enter the administrator
PIN (“22222” by default).
The empty entry mask for the account is opened to an SIP server.
If a network connection exists, the name of the gateway and the user ID (= call number) should
appear in the display within a few seconds of leaving the menu. If this is not the case, please see
“System > Accounts > Info” (see page 59).
“Info” will not be able to be called up if absolutely no access has been set up, and nothing has been
received via DHCP.
Parameter overview
Information regarding the menu control
In the setting windows of the profiles and access data, you can, by
shortly
pressing the arrow keys,
move the cursor in the entry line by one position. By
keeping
the arrow keys
pressed
, you can go to
the next entry line.
When making entries, you can determine the following accounts. Always switch between the
entry/selection lines using the arrow keys and finish the installation with
.
System name
: Name of the System
SIP server
: The server that is to be used as an SIP proxy can be a hostname or an IP address. If a spe-
cial port number is required, it can be entered after a colon.
OK
OK
New
Options
per DHCP
<Active profile>
OK
Accounts
OK
System
Menu
Содержание 312w
Страница 1: ...Aastra 312w User Guide ...
Страница 83: ...77 ...
Страница 84: ...www aastra com As off 04 2008 Version 4 The right for technical modifications is reserved Aastra 312w ...