Aastra 312w, Руководство пользователя

Страница: 18 / 84

12
Installation
Inserting the MEM card
If the MEM card is supplied separately, you will need to insert this into the battery compartment.
Safety instruction
The MEM card must be handled with great care. The contacts must be free from dust, moisture,
grease etc. Do not store the MEM card in warm areas (e.g. with direct exposure to sunlight). Do not
bend the MEM card, this could destroy the contacts.
• First press the MEM card out of the larger frame using your finger.
• Push the MEM card under the metal clip (gray in the diagram)
with the contact surfaces on the bottom and the slanted edge to
the back. Ensure that the MEM card is inserted far enough. If in
the correct position it will lie flat in the cavity and will be secured
against slipping by the two raised sections in the casing.
Never touch the shiny gold contact. Static discharge can lead to
device defects.
Removing the MEM card
You must only remove the MEM card if you want to give the handset to someone else, or if you
need the MEM card for a new handset.
• After detaching the battery cover:
Insert a pointed object (e.g. an unbent paper clip) into the back
end of the slot in the metal clip and push the MEM card under
this cover. Ensure that you do not touch the contacts, either
underneath the metal clip or on the MEM card.