Copyright © 2015 AAS Technology
AH-5
www.AAS.com.tw
1
R201507-V27
4CH Passive HD Video UTP Transceiver – TVI, CVI, AHD, CVBS
Model: VPH-400
The 4ch passive HD (non-amplified) video UTP transceiver allows transmission of realtime and
high-performance color or monochrome (B/W) CCTV video or HD TVI / HD CVI / AHD HD video
over UTP cable, perfect for multi-point surveillance.
Features
..
•
Passive, no need of power supply
•
HD TVI / HD CVI / AHD / CVBS 4 in 1 Compatible design; Real-time transmission, no delay
•
Recommendation transmission distance as below:
1) HD TVI 720p/1080p: 200m/650ft (passive to passive)
2) HD CVI 1080p: 100m/300ft ; HD CVI 720P: 370m/1200ft (passive to passive)
3) AHD-L/M 720p/960p: 330m/1050ft; AHD-H 1080p: 330m/1050ft (passive to passive)
4) Analog video: 500m/1600ft (passive to passive)
•
RJ45 or green terminal block to be chosen to connect UTP cable
•
Protection: Strong surge protection, ESD and lighting protection
•
Structure: delicate design, support MIT structure, easy operation
Package Contents
..
1.
One (1) 4CH Passive HD Video UTP Transceiver
2.
One (1) Accessory Packet (Screws, pads, rackmount ears)
3.
One (1) User Manual
Application Diagram
..
Panel View
..
Installation
..
1.
Make sure any signal source (camera) and/or monitor/DVR are turned off during installation.
2.
Check network cables and any other cables being used.
3.
Connect monitor or DVR and
VPH-400
BNC connector over coaxial cable with BNC connector.
4.
Connect
VPH-400
push terminal UTP cable connector or RJ45 connector and camera output port over UTP cable.
5.
Check whether installation is good and power the device(s).
6.
Make sure network is normal.
USER MANUAL
For any returns, please include all components listed
above with original packaging in
Resalable Condition
.
Absolutely No Returns
will be accepted if any component
is missing/damaged.
Front
Rear
