Step 3.
To turn the stove and the pilot off
completely
, turn control knob “A” to the small
flame setting, (pilot frame) depress and turn to off
position, then release (See Fig. 20e)
Fig. 20e
Important
, when control knob “A” is turned to the
off position a built-in safety lock is activated which
will prevent you from turning the control knob for
60 seconds.
Do not try to force the control, wait the 60
seconds.
NOTE!
If the pilot flame is extinguished either
intentionally or unintentionally, no attempt to re-
light the gas should be until at least 3 minutes has
elapsed.
NOTE!
During the initial firing, the stove will
give off non-toxic fumes when first used. This is
perfectly normal and will disappear after the first
few hours. It is advised to ventilate the room by
opening doors and windows to prevent irritation to
to user.
NOTE!
The fire doors can be opened during oper-
ation, for a greater viewing area to the flame pic-
ture, this does not effect the operational perform-
ance of the stove.
NOTE!
During operation, the metal surface of the
stove will be
HOT,
a operating tool is supplied
with the stove and can be used to open the doors if
required. See fig. 20f.
CLEANING OUTER SURFACES
It is best cleaned using a soft brush.
Do not allow moisture to remain on the stove while
cold or surface rust may occur.
Aarrow Sherborne GSL CF
33
USER INSTRUCTIONS
A
B
Fig. 20f
