Aardvark Paylink Lite 2, Руководство пользователя

Страница: 9 / 12

ccTalk Paylink Lite 2 User Manual Aardvark Embedded Solutions Ltd.
Issue 1.1 3
rd
August 2018 Page 9
3.4 J0501
– ccTalk Connector
The ccTalk connector on the ccTalk Paylink Lite 2 is a six-pin Molex Microfit
connector, with the same pinout as the original Paylink.
In order to maintain compatibility with
earlier versions of Paylink, the pin
allocation of this connector is as
shown in the diagram to the left.
Note that this does not match the pin
allocation described in the Molex
Microfit documentation.
Pin Signal Name Description
1 ccTalk Data This is the bidirectional ccTalk data signal.
2 +12 VF
This is the fused twelve volt supply to the
ccTalk peripherals.
3 Ground
This is the ground connection to the
twelve Volt peripherals.
4 +24 VF
This is the fused twenty-four volt supply to
the ccTalk peripherals.
5 Ground
This is the ground connection to the
twenty-four Volt peripherals.
6 +24 Volts In
This is the incoming twenty-four Volt
supply to the ccTalk peripherals.
Note that both the outgoing twelve volt and twenty-four volt supplies are fused
at 3A onboard the Paylink Lite 2.