Aardee AREPC-600, Руководство пользователя, Страница: 5 / 12

Diagram
Part s of the pressure cooker
1. Handle
2. Lid
3. Pressure limiting valve
4. Float valve (external view)
5. Float valve (internal view)
6. Lid locker-slider
7. Sliding latch for lid
8. Inner pot
9. Outer pot
10. Upper body
11. Control panel 12. Power cable
13. Steam condensation cup
14. Body cover/structure
15. Spoon/ladle holder
16. Lower body base
17. Bottom handle
18. Electronic heater
19. Seal ring for float valve
20. Filter
21. Rubber seal ring
22. Sensor
Lid Assembly
1. To install the lid, hold the lid with both hands at closed position and pull it upwards in a
slanted position which leads to a height of 10cms between the lid and the upper edge of
the cooker (11). Align the lid’s sliding valve to the pressure cooker’s lock-slider and turn it
counter-clockwise until you reach the opened lid position (12).
The lid will be installed when the lid is seated and in the horizontal position (13).
2. To open the lid, hold the handle (1) and turn it counter-clockwise until you reach the
opened-lid position (2). Lift up and the lid will swing open vertically (3).
3. To close the lid, hold the handle (1) and close it downwards at the opened-lid position (5).
Turn counter-clockwise until you reach the closed lid position (6).
2