AAQ AutoLift AL-3000AG, Руководство по установке и инструкции по эксплуатации

Страница: 4 / 37

Installation, Operation and Parts Manual
4
1.3.9 Always insure the safety latches are engaged before any attempt to work near or under the vehicle. Never remove safety related
components from the
hoist
. Do not use if safety related components are damaged or missing.
1.3.10 Do not rock the vehicle while on the
hoist
or remove any heavy component from vehicle that may cause excessive weight shift.
1.3.11 Check at any time the parts of the
hoist
to ensure the agility of moving parts and the performance of synchronization. Ensure
regular maintenance and if anything abnormal occurs, stop using the
hoist
immediately and contact our dealers for help.
1.3.12 Lower the
hoist
to its lowest position and do remember to cut off the power source when service finishes.
1.3.13 Do not modify any parts of the
hoist
without manufacturer’s advice.
1.3.14 If the
hoist
is going to be left unused for a long time, users are required to:
a. Disconnect the power source;
b. Empty the oil tank;
c. Lubricate the moving parts with hydraulic oil.
1.4 Training
Only these qualified people, who have been properly trained, can operate the
hoist
. We are quite willing to provide professional training
for the users when necessary.
Attention: For environment protection, please dispose the disused oil in a proper way.
1.5 Warning signs
AL- 3000AG (FL-8801)